spec no: dsal3995 rev no: v.2a date: jan/23/2015 page: 1 of 6 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012228 1.6x0.8mm smd chip led lamp part number: apt1608sec/j4-amt super bright orange package dimensions applications ? traffic signaling. ? backlighting (illuminated advertising , general lighting). ? interior and exterior automotive lighting. ? substitution of micro incandescent lamps. ? reading lamps. ? signal and symbol luminaire for orientation. ? marker lights (e.g. steps, exit ways, etc). ? decorative and entertainment lighting. ? indoor and outdoor commercial and residential architectural lighting. features ? high reliability led package. ? 1.6mmx0.8mm smt led,0.75mm thickness ? low power consumption. ? wide viewing angle. ? ideal for backlight and indicator. ? package: 2000pcs / reel . ? moisture sensitivity level : level 3. ? rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. the specifications, characteristics and technical data described in the datasheet are subject to change without notice. 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. description the orange source color devices are made with algainp light emitting diode.
spec no: dsal3995 rev no: v.2a date: jan/23/2015 page: 2 of 6 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012228 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2.luminous intensity/ luminous flux: +/-15%. *luminous intensity value is traceable to the cie127-2007 compliant national standards. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] code. min. max. 2 1/2 apt1608sec/j4-amt super bright orange (algainp) water clear w 1600 1900 120 x 1900 2300 y 2300 2700 z 2700 3100 *r *400 *500 *s *500 *700 *t *700 *1000 *u *1000 *1300 absolute maximum ratings at t a =25c notes: 1. rth(j-a) results from mounting on pc board fr4 (pad size 16 mm 2 per pad), 2. 1/10 duty cycle, 0.1ms pulse width. parameter symbol value unit power dissipation p d 84 mw reverse voltage v r 5 v junction temperature t j 115 c operating temperature top -40 to + 1 0 0 c storage temperature ts t g -40 to + 11 5 c dc forward current[1] i f 30 ma peak forward current [2] i fm 150 ma electrostatic dischar ge threshold (hbm) 3000 v thermal resistance (junction/ambient) [1] r th j-a 460 c/w electrical / optical characteristics at t a =25c parameter symbol value unit wavelength at peak emission i f =20ma [typ.] ? peak 611 nm dominant wavelength i f =20ma [min.] ?? dom [1] 598 nm dominant wavelength i f =20ma [max.] ?? dom [1] 612 nm spectral bandwidth at 50% ? rel max i f =20ma [typ.] ?? 17 nm v f [2] v forward voltage i f =20ma [typ.] 2.2 forward voltage i f =20ma [max.] 2.8 reverse current (v r = 5v) [max.] i r 10 ua temperature coefficient of ? peak i f =20ma, -10 ? c t 100 ? c [typ.] tc ? peak 0.12 nm/ ? c temperature coefficient of ? dom i f =20ma, -10 ? c t 100 ? c [typ.] tc ? dom 0.08 nm/ ? c temperature coefficient of v f i f =20ma, -10 ? c t 100 ? c [typ.] tc v -1.8 mv/ ? c notes: 1.the dominant wavelength ( ?? d) above is the setup value of the sorting machine. ( tolerance ?? d : 1nm. ) 2.forward voltage: +/-0.1v. 3.wavelength value is traceable to the cie127-2007 compliant national standards. 4.excess driving current and/or operating temperature higher t han recommended conditions may result in severe light degradation or premature failure.
spec no: dsal3995 rev no: v.2a date: jan/23/2015 page: 3 of 6 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012228 super bright orange apt1608sec/j4-amt
spec no: dsal3995 rev no: v.2a date: jan/23/2015 page: 4 of 6 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012228 apt1608sec/j4-amt recommended soldering pattern (units : mm; tolerance: 0.1) tape specifications (units : mm) reel dimension reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product.
spec no: dsal3995 rev no: v.2a date: jan/23/2015 page: 5 of 6 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012228 packing & label specifications apt1608sec/j4-amt terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the datas heet. if customer usage exceeds the specified limits, kingbright will not be resp onsible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbright.com/application_notes
spec no: dsal3995 rev no: v.2a date: jan/23/2015 page: 6 of 6 approved: wynec checked: allen liu drawn: q.m.chen erp : 1203012228 reliability test items and conditions the reliability of products shall be sa tisfied with items listed below lot tolerance percent defective (ltpd) : 10% no. test item standards test condition test times / cycles number of damaged 1 continuous operating test - ta =25c ,if = maximum rated current* 1,000 h 0 / 22 2 high temp. operating test eiaj ed- 4701/100(101) ta = 100c if = derated current at 100c 1,000 h 0 / 22 3 low temp. operating test - ta = -40c, if = maximum rated current* 1,000 h 0 / 22 4 high temp. storage test eiaj ed- 4701/100(201) ta = maximum rated storage temperature 1,000 h 0 / 22 5 low temp. storage test eiaj ed- 4701/100(202) ta = -40c 1,000 h 0 / 22 6 high temp. & humidity storage test eiaj ed- 4701/100(103) ta = 60c, rh = 90% 1,000 h 0 / 22 7 high temp. & humidity operating test eiaj ed- 4701/100(102) ta = 60c, rh = 90% if = derated current at 60c 1,000 h 0 / 22 8 soldering reliability test eiaj ed- 4701/100(301) moisture soak : 30c,70% rh, 72h preheat : 150~180c(120s max.) soldering temp : 260c(10s) 2 times 0 / 18 9 thermal shock operating test - ta = -40c(15min) ~ 100c(15min) if = derated current at 100c 1,000 cycles 0 / 22 10 thermal shock test - ta = -40c(15min) ~ 100c(15min) 1,000 cycles 0 / 22 11 electric static discharge (esd) eiaj ed- 4701/100(304) c = 100pf , r2 = 1.5k ? v = 3000v once each polarity 0 / 22 12 vibration test - a = 196m/s2 , f = 100~2khz , t = 48min for all xyz axes 4 times 0 / 22 * : refer to forward current vs. derating curve diagram items symbols conditions failure criteria luminous intensity lv i f = 20ma testing min. value |
